CBGA
Mẫu số: RDGA
Tỷ lệ thí điểm 3: 1, van cân bằng công suất tiêu chuẩn
Series 3/Công suất: 240 lít/phút/ Khoang: T-17A
Counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from the directional valve (port 2) to the load(port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio.
Other names for this valve include motion control valve and over-center valve.
TECHNICAL DATA NOTE:DATA MAY VARY BY CONEIGURATION,SEE CONEIGURATION SECTION
Pilot Ratio | 3:1 |
Maximum Recommended Load Pressure at Maximum Setting | 215bar |
Maximum Seting | 280bar |
Factory Pressure Settings Established at | 30cc/min. |
Maximum Valve Leakage at Reseat | 0,3cc/min. |
Adjustment-No.of CCW Turns from Min.to Max.Setting | 3.75 |
Reseat | >85%ofsetting |
Locknut HexSize | 15mm |
Locknut Torque | 9-10Nm |
Sealkit-Cartridge | Buna:990017007 |
Sealkit-Cartridge | EPDM:990017014 |
Sealkit-Cartridge | Polyurethane:990017002 |
Sealkit-Cartridge | Viton:990017006 |
CONFIGURATION OPTIONS Model Code Example: CBGALHN
CONTROL （L) |
| SEAL MATERIAL (N) | MATERIAL/COATING |
(L) Standard Screw Adjustment | (H) 1000-4000 psi w/25 psi Check(70-280 bar w/1,7 bar Check), | (N) Buna-N | Standard Material/Coating |
(C) Tamper Resistant -Factory Set | (A) 1000-4000 psi w/4 psi Check(70-280 bar w/0,3 bar Check), | (E) EPDM | AP Stainless Steel, Passivated |
(B) 400-1500 psiw/4 psi Check(28-105bar w/0,3 bar Check), | (V) Viton | LH Mild Steel, Zinc-Nickel | |
(I) 400-1500 psi w/25 psi Check(28-105 bar w/1,7 bar Check), |
For more models, please contact us via email
Deliver, Shipping And Serving
Deliver time: in stock/10-30 Day
Shipping: FOB NINGBO,FOB SHANGHAI
Serving: 24 hours on line