RPCC
Mẫu số: RPCC
Thí điểm hoạt động cân bằng piston Relief Valve
Công suất: 45 lít/phút/phút khoang; Mô hình T-162A
Pilot-operated, balanced-piston relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. These valves are accurate, have low pressure rise vs.flow, they are smooth and quiet, and are moderately fast.
TECHNICAL DATA NOTE:DATA MAY VARY BY CONEIGURATION,SEE CONEIGURATION SECTION
Factory Pressure Settings Establishedat | 15L/min. |
Maximum Operating Pressure | 350bar |
Maximum Valve Leakage at 110SUS(24cSt) | 30cc/min.@70bar |
Response Time-Typical | 10ms |
Adjustment-No.of CW Turns from Min.toMax.setting | 5 |
Locknut Hex Size | 12,7mm |
Locknut Torque | 9-10Nm |
Sealkit-Cartridge | Buna:990162007 |
Sealkit-Cartridge | EPDM:990162014 |
Sealkit-Cartridge | Polyurethane:990162002 |
Sealkit-Cartridge | Viton:990162006 |
NOTES For Series 1 cartridges configured with an O control (panel mount handknob), a.75 in.(19 mm) diameter hole is required in the panel.
CONFIGURATION OPTIONS Model Code Example: RPGELAN
CONTROL （L) |
| SEAL MATERIAL (N) | MATERIAL/COATING |
(L) Standard Screw Adjustment | (A) 75-3000 psi(5-210 bar), | (N) Buna-N | Standard Material/Coating |
(C) Tamper Resistant -Factory Set | (W) 75-4500 psi(5-315 bar), | (E) EPDM | AP Stainless Steel, Passivated |
(K) Handknob | (B) 75- 1500 psi(5- 105 bar), | (V) Viton | LH Mild Steel, Zinc-Nickel |
(C) 75-6000 psi(70-420 bar), | |||
(N) 75-800 psi(5-55 bar), | |||
(Q) 75-400 psi(5-28 bar), |
For more models, please contact us via email
Deliver, Shipping And Serving
Deliver time: in stock/10-30 Day
Shipping: FOB NINGBO,FOB SHANGHAI
Serving: 24 hours on line