RDDA
Mẫu số: RDDA
Van an toàn tác động trực tiếp
Series 1/Công suất: 95 lít/phút/ Khoang: T-10A
Direct-acting relief cartridges are normally closed, pressure-limiting valves used to protect hydraulic components from pressure transients. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to limit the pressure rise. These valves are smooth and quiet, essentially zero leak, dirt tolerant, immune to silting and are very fast.
TECHNICAL DATA NOTE:DATA MAY VARY BY CONEIGURATION,SEE CONEIGURATION SECTION
Factory Pressure Settings Establishedat | 15L/min. |
Maximum Operating Pressure | 350bar |
Maximum Valve Leakage a tReseat | 0,7cc/min. |
Response Time-Typical | 2ms |
Reseat | >90%ofsetting |
Adjustment-No.of CW Turns from Min.to Max.seting | 6 |
Locknut Hex Size | 15mm |
Locknut Torque | 9-10Nm |
Sealkit-Cartridge | Buna:990310007 |
Sealkit-Cartridge | EPDM:990310014 |
Sealkit-Cartridge | Viton:990310006 |
CONFIGURATION OPTIONS Model Code Example: RPGELAN
CONTROL （L) |
| SEAL MATERIAL (N) | MATERIAL/COATING |
(L) Standard Screw Adjustment | (A) 500-3000 psi(55-210 bar), | (N) Buna-N | Standard Material/Coating |
(C) Tamper Resistant - Factory Set | (W) 800-4500 psi(55-315 bar), | (E) EPDM | AP Stainless Steel, Passivated |
(Y) Tri-Grip Handknob | (B) 300- 1500 psi(20- 105 bar), | (V) Viton | LH Mild Steel, Zinc-Nickel |
(C) 1000-6000 psi(70-420 bar), | |||
(D) 200-800 psi(14-55 bar), | |||
(E) 100-400 psi(7-28 bar), | |||
(S) 50-200 psi(3,5- 14 bar), bar) Standard Setting |
For more models, please contact us via email
Deliver, Shipping And Serving
Deliver time: in stock/10-30 Day
Shipping: FOB NINGBO,FOB SHANGHAI
Serving: 24 hours on line